跳至主要内容

SA 210 A1

ASTM A210 is the standard covers seamless medium-carbon steel boiler and superheater tubes.


ASTM A210 Grade A-1 Carbon Steel Seamless Tubes are Medium Carbon Steel Tubes with max 0.27 % carbon content with combination of max 0.93 % manganese.

These Tubes are most commonly used for general purpose applications worldwide. ASTM A210 Grade A-1 Tubes are ductile and strong Tubes with long wearing properties.

These Tubes are manufactured as per ASTM Specification and commercially referred as carbon steel Tubes.

Chemical Properties:

Carbon: 0.14 maxSilicon: 0.10-0.50
Manganese: 0.30-0.80Nickel: n/a
Potassium: 0.025Chromium: n/a
Sulfur: 0.025Molybdenum: 0.44-0.65

Mechanical Properties:

Tensile Strength:

ksi: 53

MPa: 365

Yield:

ksi: 28

MPa: 193

Elongation in 2in. or 50mm, min. %: 30

Max. Hardness Rockwell B: 77

Equivalent Designation

DINENBSNFAASTMASME
DIN 17175 Grade St 45.8EN P265GH Grade 10216-2NFA A 49-215 Grade TU 42-cASTM A210 Grade A-1ASME SA 210 Grade A-1UNI C18

ASTM A210 Grade A-1 specification covers several grades of minimum wall-thickness, seamless, carbon-molybdenum alloy-steel, boiler and super heater tubes. Recommended pipe size will be developed by FerroPipe upon receipt of your inquiry. A print or sketch of the part to be produced should be included. Grade, chemical analysis and surface condition are carefully considered, and production processes are tailored to achieve the best tubing for the end use.

In addition to the marking specified in Specification A 999/A 999M, the marking should have the length, an additional symbol -S-, if ASTM A210 Grade A-1 Carbon Steel Seamless Tubes conforms to any of the Supplementary Requirements S1 to S6, the schedule number of the pipe is ordered to a schedule number viz. SCH 5,10,20,30,40,60,80,100,120,140,160,XS, XXS, STD, and the heat number of or manufacturer-s number by which the heat can be identified as per ASTM A210 Grade A-1.

Wall Thickness : the minimum wall thickness at any point or end on ASTM A210 pipes and tubes shall not be greater than 12.5% under the nominal thickness specified.

Inner Diameter: For pipe ordered in inside diameter, the inside diameter shall not vary more than ñ 1% from the required/specified inside diameter.

The Manufacturer shall provide Material Test certificate of inspection to the purchaser stating that the material has been manufactured, sampled, tested, and inspected in accordance with ASTM A210 Grade A-1( including year of issue), and has satisfied all the requirements of ASTM A210.

Pipes and Tubes manufactured as per ASTM A210 Grade A-1 are certified with En 10204 Type 3.1/3.2. IBR,NACE,HIC,IGC,IMPACT are adhered as supplementary testing requirements.

评论

发表评论

此博客中的热门博文

JIS G3461 G3462 Carbon steel Alloy steel boiler and heat exchanger tubes

  JIS G3461,G3462 Carbon steel/Alloy steel boiler and heat exchanger tubes used for exchanging heat on the inside and outside of the tube, such as water tubes, smoke tubes, superherater tubes, air preheater tubes, etc. The main products of steel / steel grade: G3461(STB340, STB410, STB510) G3462(STBA22, STBA23). Standard: JIS G3461 Carbon steel boiler and heat exchanger tubes JIS G3462 Alloy steel boiler and heat exchanger tubes Size (mm): Outer Dimensions: 19.05mm - 168.3mm Wall Thickness:2.0mm - 14 mm Length: max 19000mm Enable Ginger Cannot connect to Ginger Check your internet connection or reload the browser Disable in this text field Rephrase Rephrase current sentence Edit in Ginger ×
发表评论
阅读全文

Multi-rifled seamless steel tube

  Multi-rifled seamless steel tube is used as a water wall tube loaded with a highly heated flux and is also expected to find broadened other uses in the viewpoint of iits energy saving effect and higher safety against the overheating damage. This has groove on its inside surface which functions to raise thermal efficiency by distrubing the fluid within the tube, featuring and extremely high thermal conduction property. Available grades and size range: Multi-rifled seamless steel tube are produced to meet specific end use requirements, specifications, tolerances and chemistries. Standard Grade Specification O.D.(mm) W.T.(mm) Number of rib GB/T 20409-2006 20G 15CrMoG SA-210A1 SA-210C SA-213 T2 SA-213 T12 22-83 4.5-13    4-14     Grade and Chemical Composition (%) Steel Grade C Si Mn S P Cr Mo 20G 0.17-0.23 0.17-0.37 0.35-0.65 0.015 0.025 　 　 15CrMoG 0.12-0.18 0.17-0.37 0.40-0.70 0.015 0.025 0.80-1.10 0.40-0.55 A 210A1 SA-210A1 ≤0.27 ≥0.10 ≤0.93 0.020 0.025 　...
发表评论
阅读全文

ASTM A192 / A192M Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

The ASTM A192 belongs to the carbon seamless tubes, which is specially designed for high, middle, low pressure purpose in seamless carbon steel boilers and as super heater tubes. ASTM A192 Boiler Tube   Description: This specification has been approved for use by agencies of the Department of Defense. Consult the DoD Index of Specifications and Standards for specific year of issue which has been adopted by the Department of Defense. Size (mm): O.D.:6.0-114.0 W.T.:1-15 L:max 12000 Delivery Condition : As different requirements,It including pickling,etc. Test: Hydrostatic or Nondestructive Electric Test Heat Treatment:Min temperature 650. Surface Condition:Free of scale,A slight amount of oxidation will not be considered as scale. Flattening Test,Flaring Test.Flange Test,Hardness Test,Hydrostatic Test Features Specifications OD(mm) 　 Wall Thickness Unit(mm) 2 2.5 3 3.5 4 4.5 5 6 6.5-7 7.5-8 8.5-9 9.5-10 11 12 Φ25-Φ28 ● ● ● ● ● ● 　 　 　 　 　 　 　 　 Φ32 　 ● ● ● ● ● ● 　 　 　 　 　 　 　 Φ34-Φ36...
发表评论
阅读全文