跳至主要内容

SA 209 T1

 SA 209 T1 Seamless carbon molybdenum alloy steel boiler and superheater tubes.

ASTM A209 Grade T1a Alloy Steel Seamless Tubes are Carbon Steel Tubes with subsequent addition of chromium, molybdenum and sometimes vanadium are known as chrome moly Tubes.




ASTM Specification alloy steel Tubes are used for high temperature service applications. Seamless Alloy Steel Tubes according to ASTM A209 Grade T1a are reheated and furnished in full annlealed,isothermal annealed or normalised quenched and tempered condition.

ASTM A209 Grade T1a Alloy Steel Seamless Tubes have a typical chemistry with additions of 0.44-0.65 Molybdenum. Bearing minimum tensile strength of 365 Mpa ASTM A209 Grade T1a Tubes have a minimum yield strength of 195 Mpa.

ASTM A209

ASTM A209 cover several grades of minimum wall thickness seamless carbon molybdenum alloy steel, boiler and superheater tubes.

This specification covers tubes 1/2 to 5 in. [12.7 to 127 mm] inclusive, in outside diameter and 0.035 to 0.500 in. [0.9 to 12.7 mm], inclusive, in minimum wall thickness.

An optional supplementary requirement is provided and, when desired, shall be so stated in the order.

The values stated in either inch-pound units or SI units are to be regarded separately as standard. Within the text, the SI units are shown in brackets. The values stated in each system are not exact equivalents; therefore, each system must be used independently of the other. Combining values from the two systems may result in nonconformance with the specification. The inch-pound units shall apply unless the "M" designation of this specification is specified in the order.

Chemical Properties:
Steel GradeCSiMnSPCrMo
A209T1
SA-209T1		0.10-0.200.10-0.500.30-0.800.0200.025　0.44-0.65
A209T1b
SA-209T1b		≤0.140.10-0.500.30-0.800.0200.025　0.44-0.65
A209T1a
SA-209T1a		0.15-0.250.10-0.500.30-0.800.0200.025　0.44-0.65
Mechanical Properties:
GradeTensile strength
(Mpa)		Yield point(Mpa)
not less than		Hardness
not less than
A 209T1/SA-209 T1≥38020580HRB
A 209T1b/SA-209T1b≥36519577HRB
A209T1a/SA-209T1a≥41522081HRB

Equivalent Designation

DINENBSNFAASTMASME
DIN 17175 Grade 16Mo5–– –ASTM A209 GradeT1aASME SA 209 Grade T1a–

标签：

评论

发表评论

此博客中的热门博文

JIS G3461 G3462 Carbon steel Alloy steel boiler and heat exchanger tubes

  JIS G3461,G3462 Carbon steel/Alloy steel boiler and heat exchanger tubes used for exchanging heat on the inside and outside of the tube, such as water tubes, smoke tubes, superherater tubes, air preheater tubes, etc. The main products of steel / steel grade: G3461(STB340, STB410, STB510) G3462(STBA22, STBA23). Standard: JIS G3461 Carbon steel boiler and heat exchanger tubes JIS G3462 Alloy steel boiler and heat exchanger tubes Size (mm): Outer Dimensions: 19.05mm - 168.3mm Wall Thickness:2.0mm - 14 mm Length: max 19000mm Enable Ginger Cannot connect to Ginger Check your internet connection or reload the browser Disable in this text field Rephrase Rephrase current sentence Edit in Ginger ×
发表评论
阅读全文

Multi-rifled seamless steel tube

  Multi-rifled seamless steel tube is used as a water wall tube loaded with a highly heated flux and is also expected to find broadened other uses in the viewpoint of iits energy saving effect and higher safety against the overheating damage. This has groove on its inside surface which functions to raise thermal efficiency by distrubing the fluid within the tube, featuring and extremely high thermal conduction property. Available grades and size range: Multi-rifled seamless steel tube are produced to meet specific end use requirements, specifications, tolerances and chemistries. Standard Grade Specification O.D.(mm) W.T.(mm) Number of rib GB/T 20409-2006 20G 15CrMoG SA-210A1 SA-210C SA-213 T2 SA-213 T12 22-83 4.5-13    4-14     Grade and Chemical Composition (%) Steel Grade C Si Mn S P Cr Mo 20G 0.17-0.23 0.17-0.37 0.35-0.65 0.015 0.025 　 　 15CrMoG 0.12-0.18 0.17-0.37 0.40-0.70 0.015 0.025 0.80-1.10 0.40-0.55 A 210A1 SA-210A1 ≤0.27 ≥0.10 ≤0.93 0.020 0.025 　...
发表评论
阅读全文

ASTM A192 / A192M Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

The ASTM A192 belongs to the carbon seamless tubes, which is specially designed for high, middle, low pressure purpose in seamless carbon steel boilers and as super heater tubes. ASTM A192 Boiler Tube   Description: This specification has been approved for use by agencies of the Department of Defense. Consult the DoD Index of Specifications and Standards for specific year of issue which has been adopted by the Department of Defense. Size (mm): O.D.:6.0-114.0 W.T.:1-15 L:max 12000 Delivery Condition : As different requirements,It including pickling,etc. Test: Hydrostatic or Nondestructive Electric Test Heat Treatment:Min temperature 650. Surface Condition:Free of scale,A slight amount of oxidation will not be considered as scale. Flattening Test,Flaring Test.Flange Test,Hardness Test,Hydrostatic Test Features Specifications OD(mm) 　 Wall Thickness Unit(mm) 2 2.5 3 3.5 4 4.5 5 6 6.5-7 7.5-8 8.5-9 9.5-10 11 12 Φ25-Φ28 ● ● ● ● ● ● 　 　 　 　 　 　 　 　 Φ32 　 ● ● ● ● ● ● 　 　 　 　 　 　 　 Φ34-Φ36...
发表评论
阅读全文