跳至主要内容

347/347H Stainless Steel

 Alloy 321 (UNS S32100) is a titanium stabilized austenitic stainless steel with good general corrosion resistance.



Type 321 is basic type 304 modified by adding titanium in an amount at least 5 times the carbon plus nitrogen contents.

These titanium bearing stainless steels are stabilized against carbide precipitation and designed for eperation within the damaging temperature range where carbide precipitation develops. In this type of steel, the carbon combines preferentially with titanium to form a harmless titanium carbide, leaving the chromium in solution ot maintain full corrosion resistance.

Common Applications

  • Aerospace – piston engine manifolds
  • Chemical Processing
  • Expansion Joints
  • Food Processing – equipment and storage
  • Petroleum Refining – polythionic acid service
  • Waste Treatment – thermal oxidizers

Specifications -321/321H Stainless Steel

  • ASTM:A312, A403, A182
  • ASME: SA312, SA403, SA182

Chemical Composition - 321/321H Stainless steel

Grade321321H
UNS DesignationS210000S32109
Carbon (C) Max.0.080.04 – 0.10
Manganese (Mn) Max.2.002.00
Phosphorous (P) Max.0.0400.040
Sulphur (S) Max.0.0300.030
Silicon (Si) Max.0.750.75
Chromium (Cr)17.0 – 20.017.0 – 20..0
Nickel (Ni)9.0 – 12.09.0 – 12.0
Molybdenum (Mo)——
Nitrogen (N)0.1 Max.0.1 Max.
Iron (Fe)Bal.Bal.
Other ElementsTi=5(C) to 0.70%Ti=5(C) to 0.60%

*The titanium content shall not be less than 5 times the carbon content and not more than 0.60%.  321H requires the titanium content to be not less than 4 times the carbon content and not more than 0.60%.

Typical Mechanical Properties

MaterialTensile Strength Rm, N/mm²Yield Strength Rp 0.2, N/mm²
% Elongation
Alloy 321 Tube
500-73020035

Design Features - 321/321H Stainless Steel

  • Immune to intergranular corrosion when heated within the carbide precipitation range.
  • Titanium addition eliminates the formation of chromium carbides at the grain boundaries by tying up the carbon and nitrogen as titanium carbides or nitrides.
  • Better high temperature properties than 304 or 304L.  Generally used for parts which are intermittently heated up to 1500°F. For continuous service the alloy is good to 1650°F.
  • May be susceptible to chloride stress cracking.
  • Excellent weldability in field.
  • Type 321H has high carbon (.04 to .10) for better high temperature creep properties.

Typical Applications - 321/321H Stainless Steel

  • High temperature chemical process heat exchanger tubes
  • Refineries
  • High temperature steam service

Tensile Requirements - 321/321H Stainless Steel

  • Tensile Strength (KSI): 75
  • Yield Strength (KSI): 30

Proces：

Alloy 321/H can be easily welded and processed by standard shop fabrication practices.

Hot Forming

  • Working temperatures of 2100 – 2300°F (1149 – 1260°C) are recommended for forging, upsetting and other hot working processes.
  • Alloy not suitable for work at temperatures below 1700°F (927°C).
  • Material must be water quenched or fully annealed after working to re-attain maximum corrosion resistance.

Cold Forming

  • Quite ductile and forms easily.

Welding

  • Readily welded by most standard processes.
  • Post weld heat treatment is not necessary

Machining

  • Hardening rate of 321 makes it less machinable than 410 stainless steel, but similar to 304

Corrosion Resistance

  • exhibits good general corrosion resistance that is comparable to 304.
  • developed for use in the chromium carbide precipitation range of 1800 – 1500°F (427 – 816°C) .
  • can be used in most diluted organic acids at moderate temperatures .
  • can be used in pure phosphoric acid at lower temperatures.
  • can be used in up to 10% diluted solutions at elevated temperatures.
  • resists polythionic acid stress corrosion cracking in hydrocarbon service.
  • utilized in chloride or fluoride free caustic solutions at moderate temperatures.
  • does not perform well in chloride solutions, even in small concentrations, or in sulfuric acid service.


评论

发表评论

此博客中的热门博文

JIS G3461 G3462 Carbon steel Alloy steel boiler and heat exchanger tubes

  JIS G3461,G3462 Carbon steel/Alloy steel boiler and heat exchanger tubes used for exchanging heat on the inside and outside of the tube, such as water tubes, smoke tubes, superherater tubes, air preheater tubes, etc. The main products of steel / steel grade: G3461(STB340, STB410, STB510) G3462(STBA22, STBA23). Standard: JIS G3461 Carbon steel boiler and heat exchanger tubes JIS G3462 Alloy steel boiler and heat exchanger tubes Size (mm): Outer Dimensions: 19.05mm - 168.3mm Wall Thickness:2.0mm - 14 mm Length: max 19000mm Enable Ginger Cannot connect to Ginger Check your internet connection or reload the browser Disable in this text field Rephrase Rephrase current sentence Edit in Ginger ×
发表评论
阅读全文

Multi-rifled seamless steel tube

  Multi-rifled seamless steel tube is used as a water wall tube loaded with a highly heated flux and is also expected to find broadened other uses in the viewpoint of iits energy saving effect and higher safety against the overheating damage. This has groove on its inside surface which functions to raise thermal efficiency by distrubing the fluid within the tube, featuring and extremely high thermal conduction property. Available grades and size range: Multi-rifled seamless steel tube are produced to meet specific end use requirements, specifications, tolerances and chemistries. Standard Grade Specification O.D.(mm) W.T.(mm) Number of rib GB/T 20409-2006 20G 15CrMoG SA-210A1 SA-210C SA-213 T2 SA-213 T12 22-83 4.5-13    4-14     Grade and Chemical Composition (%) Steel Grade C Si Mn S P Cr Mo 20G 0.17-0.23 0.17-0.37 0.35-0.65 0.015 0.025 　 　 15CrMoG 0.12-0.18 0.17-0.37 0.40-0.70 0.015 0.025 0.80-1.10 0.40-0.55 A 210A1 SA-210A1 ≤0.27 ≥0.10 ≤0.93 0.020 0.025 　...
发表评论
阅读全文

ASTM A192 / A192M Standard Specification for Seamless Carbon Steel Boiler Tubes for High-Pressure Service

The ASTM A192 belongs to the carbon seamless tubes, which is specially designed for high, middle, low pressure purpose in seamless carbon steel boilers and as super heater tubes. ASTM A192 Boiler Tube   Description: This specification has been approved for use by agencies of the Department of Defense. Consult the DoD Index of Specifications and Standards for specific year of issue which has been adopted by the Department of Defense. Size (mm): O.D.:6.0-114.0 W.T.:1-15 L:max 12000 Delivery Condition : As different requirements,It including pickling,etc. Test: Hydrostatic or Nondestructive Electric Test Heat Treatment:Min temperature 650. Surface Condition:Free of scale,A slight amount of oxidation will not be considered as scale. Flattening Test,Flaring Test.Flange Test,Hardness Test,Hydrostatic Test Features Specifications OD(mm) 　 Wall Thickness Unit(mm) 2 2.5 3 3.5 4 4.5 5 6 6.5-7 7.5-8 8.5-9 9.5-10 11 12 Φ25-Φ28 ● ● ● ● ● ● 　 　 　 　 　 　 　 　 Φ32 　 ● ● ● ● ● ● 　 　 　 　 　 　 　 Φ34-Φ36...
发表评论
阅读全文